高温高压环境下煤油液滴蒸发过程实验研究

应用高速摄影系统和图像处理技术研究了煤油液滴在温度473~773 K、压力1.0~4.0 MPa静止气体环境下的蒸发过程,得到了环境温度与环境压力对煤油液滴特性的影响规律。实验结果表明:环境温度低于573 K时,煤油液滴蒸发D2曲线不符合d2定律;环境温度高于673 K低于773 K时,液滴直径变化与d2定律吻合。环境压力对液滴蒸发的影响与环境温度密切相关,环境温度低于473 K时,随着环境压力的升高,液滴蒸发速率变慢;环境温度高于673 K时,随着环境压力的升高液滴蒸发速率加快。     

高温气体喷水冷却过程数值仿真研究

环控试验会排出大量的高温气体,高温气体可通过喷水冷却到合适的温度后排出室外,高温气体喷水冷却过程不仅包含了气、液两相耦合流动,而且存在水的蒸发相变.以国内某环控试验室高温气体喷水冷却系统为例,提出了一种基于欧拉-拉格朗日多相流模型的高温气体喷水冷却过程数值仿真方法,并在STAR-CCM+上进行了数值仿真研究,仿真结果表明方法对于高温气体喷水冷却过程数值仿真具有一定的参考意义.     

CFD simulation of helicopter rotor flow based on unsteady actuator disk model

Actuator Disks (AD) can provide characterizations of rotor wakes while reducing computational expense associated with modeling the fully resolved blades. This work presents an unsteady actuator disk method based on surface circulation distribution combined with empirical data, blade element theory and rotor momentum theory. The nonuniform circulation distribution accounts for 3D blade load effects, and in particular, tip loses. Numerical simulations were conducted for the isolated pressure sensitive paint model rotor blade in hover and forward flight using the HMB3 CFD solver of Glasgow University. Validation of CFD results in comparison with published numerical data was performed in hover, for a range of blade pitch angles using fully turbulent flow and the k-ω SST model. In forward flight, the vortex structures predicted using the unsteady actuator disk model showed configurations similar to the ones obtained using fully resolved rotor blades. Despite the reduced grid cells number, the CFD results for AD models captured well the main vortical structures around the rotor disk in comparison to the fully resolved cases.     

多组分液滴自然对流厚交换层蒸发模型及其检验

为发展多组分液体燃料高温蒸发模型,首先以零扩散和无限扩散概念为基础,拓展考虑自然对流的厚交换层高温蒸发模型到多组分液体燃料,提出多组分NC-TEL模型。其次,采用挂滴法对正庚烷-乙醇、正癸烷-乙醇、RP-3航空煤油-乙醇三种混合燃料的单液滴在高温静止和强迫对流条件下的蒸发特性进行实验研究。实验结果显示:混合液滴蒸发速率随温度升高而显著增大,温度越高组分构成比例对液滴蒸发率的影响越明显;本文实验条件下,对流环境对于液滴蒸发的促进作用并不明显。最后,用实验数据检验蒸发模型。模型对比结果显示:总体上,NC-TEL模型优于R-M模型,高温段预测精度平均提升了8%～35%;低温段,零扩散NC-TEL模型与实验结果吻合程度较好,而无限扩散NC-TEL模型与实验结果相比误差略大;高温段,对于正庚烷-乙醇混合燃料液滴,NC-TEL模型预测较为准确,而对于正癸烷/RP-3航空煤油-乙醇混合燃料液滴,NC-TEL模型预测值则偏低,可能的原因是微爆现象和Marangoni现象。     

Review of theoretical achievements for starting flow problem for all Mach numbers

The typical behavior of unsteady flow and force evolution in a number of applications, such as aero-elastics, gust-wing interaction, flapping flight and flight maneuvering, can be understood using the starting flow model. Starting flow model is obtained either by setting rapidly an angle of attack for a wing moving at constant speed, or by accelerating a wing to a constant speed while gaining an angle of attack. In the limiting case of impulsively starting flow, the wing is assumed to gain suddenly an angle of attack in an initially uniform flow. Theories have been developed for impulsively starting flow at small angle of attack long before and at large angle of attack only recently, especially for incompressible and supersonic flow. This paper intends to provide a state-of-art overview of the typical flow phenomena, force evolution characteristics and developed theories for impulsively starting flow at any angle of attack and for both lower speed flow (vortex dominated) and high speed flow (compressible wave dominated). This review also provides some new topics that deserve further studies.     

Subsonic impulsively starting flow at a high angle of attack with shock wave and vortex interaction

Impulsively starting flow, by a sudden attainment of a large angle of attack, has been well studied for incompressible and supersonic flows, but less studied for subsonic flow. Recently, a preliminary numerical study for subsonic starting flow at a high angle of attack displays an advance of stall around a Mach number of 0.5, when compared to other Mach numbers. To see what happens in this special case, we conduct here in this paper a further study for this case, to display and analyze the full flow structures. We find that for a Mach number around 0.5, a local supersonic flow region repeatedly splits and merges, and a pair of left-going and right-going unsteady shock waves are embedded inside the leading edge vortex once it is sufficiently grown up and detached from the leading edge. The flow evolution during the formation of shock waves is displayed in detail. The reason for the formation of these shock waves is explained here using the Laval nozzle flow theory. The existence of this shock pair inside the vortex, for a Mach number only close to 0.5, may help the growing of the trailing edge vortex responsible for the advance of stall observed previously.     

提高F-P腔精细度方法的研究

采用真空蒸发镀膜的方法,在光纤端面镀以由ZrO2/SiO2膜系构成的高反射膜,将光纤端面的反射率由原来的4%提高为80%,改善了光纤F-P腔反射光谱的精细度,可提高光纤F-P传感器在进行波分复用时的复用数量。     

非定常气动力计算中的偶极子格网法

从亚音速、跨音速和超音速三个方面叙述了非定常气动力计算中的偶极子格网法，且给出了其基本解法和计算实例。